Products / Urbidermis /
Candela
Luminaire with oval geometry, designed to illuminate wide urban roads. Candela is a flexible illumination system, with one or two luminaires at the same or different heights, and different lengths of arm.
Power without pollution
The Candela urban luminaire contains the optical and electrical assembly, neatly arranged. Its high degree of efficiency, the option for regulation, and a specific light layout using a wide range of optics, provides good visual comfort and specific illumination on roads, avenues or wide pedestrian pavements, with no light pollution.
- Anodised injection-moulded aluminium EN-AC-47100 luminaire with powder-coated finish.
- Tempered optical glass diffuser.
- A2 stainless steel hardware and metal cable gland.
Light grey
Medium grey
Dark grey
The colours shown are purely indicative.
Other colours are available upon request.
Check finishes for marine environments.
System power (W)
High efficiency optical unit
24 LEDs 27W, 38W, 53W
48 LEDs 51W, 73W, 102W
72 LEDs 78W, 111W, 156W
96 LEDs 100W, 145W, 202W
Operating current (mA)
350
500
700
Colour temperature (K)
4000 CRI min80
3000 CRI min80
2700 CRI min80
2200 CRI min70
PC Amber CRI min40
Other colour temperatures and/or CRIs are available upon request.
Service life
TM21 L90 (10k) > 100,000 h
All our products support remote regulation, both individually and in groups, through the most standardised control systems, significantly reducing energy consumption and eliminating light pollution. We adapt our products to safeguard biodiversity and respect circadian rhythms, eliminating harmful wavelengths.
Our luminaires comply with the American IESNA LM80 and TM21 standards.
Controls
1-10V / 0-10V
Analog one-way regulation protocol that, through a signal between 1 or 0 and 10 V, allows remote linear control of the luminous flux between 10% or 0% and 100%. The standard programming is as follows: Vi ≥ 8V – 100%; Vi ≤ 1V – 10%.
DALI
Two-way digital communication protocol (Digital Addressable Lighting Interface) that allows grouping, regulating, and turning off the luminaire, using an 8-bit resolution with 254 regulation steps and receiving information about its status for maintenance.
Programmes
Automatic programming
Individual, self-managed programming in the product and bi-directional. It is configured prior to installation. It is useful in projects that require a single pattern throughout the product’s life. It incorporates automatic regulation steps with geolocation and real nighttime cycles.
Example: 100% from 21:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 05:00; 70% from 05:00 to 08:00.
Automatic control panel programming
Individual, self-managed programming in the control panel and one-way. It is configured prior to installation. It can coexist with other analog voltage reduction technologies, such as phase-cut. It is useful in projects that need different patterns throughout the year or the product’s life.
Example: Summer 100% from 21:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 05:00; Winter 100% from 16:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 08:00.
Command line programming
Group regulation, in the control panel and one-way. It requires the installation of an additional control electrical line besides the power line (2×2.5mm2). It is useful in projects that need simplified regulation.
Lighting Flow dimmer programming
Group regulation, in the control panel and one-way. It requires the installation of a stabilizer/voltage regulator in the control panel and product configuration to interpret the correlation between line voltage and power. It is useful in projects that need a simplified system with existing regulators.
Example: Vi ≥ 230V – 100%; Vi ≤ 185V – 60%
Functionalities
Constant Luminous Management (CLM)
Optional function parallel to the programming that maintains the project illumination levels constant throughout the installation’s life, increasing the luminaire’s power proportionally to the LED depreciation. Our standard programming is 0h 80%; 60,000h 100%.
Temperature control
Optional automatic protection to safeguard the integrity of the lighting components. It monitors the maximum temperature, activating a flow reduction to recover an acceptable value.
Surge protection
Protector against voltage spikes caused by thunderstorms. Sized for a maximum discharge current of 10kA.
- Includes pressure compensation valve and 10kV surge protector (CE).
- Clean using pH-neutral, alcohol-free, and non-abrasive cleaning products.
CE
UL
RoHs
IP66
IK08
Clase I
Distributions
Type II
Type II+III
Type III
Type IV
Applications
Column lighting is the most well-organized, functional option for urban projects. It harmonizes layouts from a technical perspective, with good rates of uniformity and suitable lighting values. Single or double accessories allow the luminaire to be moved away from the support and the tops of roadside trees.
Materials
Anodised injection-moulded aluminium EN-AC-47100 flange with powder-coated finish. Hot-dip galvanized, powder-coated steel arm. A2 stainless steel hardware.
Column, with one or two sections, made of hot-dip galvanized cylindrical S-275 JR Class 1 steel tube with a powder-coated finish. Zinc-plated steel (275) bolts. Zinc-plated steel hardware.
Installation
Column secured via a concrete block, with a groove for electrical connection, which is produced on site with four anchoring bolts per column, 20 cm below the level of the pavement.
Template and anchoring bolts included.
Weight
Luminaire: 11.5
Flange: 0.7
Short arm: 1.6
Medium arm: 2.1
Long arm: 4.0
*Approximate weight without packaging (kg)
Candela in the city
Sínia d'en Gil street
Palma de Mallorca, Spain
Passeig de Gràcia
Barcelona, Spain
Zorrotzaurre
Bilbao, Spain
Salt Lake City International Airport
Salt Lake City, UT, USA