Rama

Rama

Minimalist lighting system with a strong linear character. The Rama luminaire is presented as a “tree of light”. It illuminates specifically or generally, in a very versatile manner, integrating easily into its environment. It is defined by its cylindrical column, and great freedom in terms of its composition, with different heights and orientations.

20240720-Spain-Sitges-Port-Ginesta-AOL-ARPC-PAP-RAF-TMA-Pol-

20240720-Spain-Sitges-Port-Ginesta-AOL-ARPC-PAP-RAF-TMA-Pol- (1)

20240720-Spain-Sitges-Port-Ginesta-AOL-ARPC-PAP-RAF-TMA-Equi

20240409-Spain-Barcelona-Via-Laietana-RAFM-Equipo-Urbidermis

Integration into the landscape

When used in a line, the luminaire helps to organize and harmonize urban spaces. The Rama urban luminaire offers a wide range of lighting layouts that are low in light pollution, guaranteeing effective values, visual comfort and energy efficiency. It provides good quality illumination, both for pedestrian spaces and roads.

Anodised injection-moulded aluminium EN-AC-47100 luminaire with powdercoated finish.
Tempered optical glass diffuser.
A2 stainless steel hardware and metal cable gland.

The colours shown are purely indicative.
Other colours are available upon request.
Check finishes for marine environments.

System power (W)

High efficiency optical unit

12 LEDs 14W, 20W, 28W
24 LEDs 27W, 38W, 53W
48 LEDs 51W, 73W, 102W
72 LEDs 78W, 111W, 156W

Operating current (mA)

Colour temperature (K)

4000 CRI min 80
3000 CRI min 80
2700 CRI min 80
2200 CRI min 70
PC Amber CRI min 40

Other colour temperatures and/or CRIs are available upon request.

Service life

TM21 L90 (10k) > 100,000 h

All our products support remote regulation, both individually and in groups, through the most standardised control systems, significantly reducing energy consumption and eliminating light pollution. We adapt our products to safeguard biodiversity and respect circadian rhythms, eliminating harmful wavelengths.

Our luminaires comply with the American IESNA LM80 and TM21 standards.

Controls

1-10V / 0-10V

Analog one-way regulation protocol that, through a signal between 1 or 0 and 10 V, allows remote linear control of the luminous flux between 10% or 0% and 100%. The standard programming is as follows: Vi ≥ 8V – 100%; Vi ≤ 1V – 10%.

DALI

Two-way digital communication protocol (Digital Addressable Lighting Interface) that allows grouping, regulating, and turning off the luminaire, using an 8-bit resolution with 254 regulation steps and receiving information about its status for maintenance.

Programmes

Automatic programming

Individual, self-managed programming in the product and bi-directional. It is configured prior to installation. It is useful in projects that require a single pattern throughout the product’s life. It incorporates automatic regulation steps with geolocation and real nighttime cycles.

Example: 100% from 21:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 05:00; 70% from 05:00 to 08:00.

Automatic control panel programming

Individual, self-managed programming in the control panel and one-way. It is configured prior to installation. It can coexist with other analog voltage reduction technologies, such as phase-cut. It is useful in projects that need different patterns throughout the year or the product’s life.

Example: Summer 100% from 21:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 05:00; Winter 100% from 16:00 to 22:00; 70% from 22:00 to 01:00; 50% from 01:00 to 08:00.

Command line programming

Group regulation, in the control panel and one-way. It requires the installation of an additional control electrical line besides the power line (2×2.5mm2). It is useful in projects that need simplified regulation.

Lighting Flow dimmer programming

Group regulation, in the control panel and one-way. It requires the installation of a stabilizer/voltage regulator in the control panel and product configuration to interpret the correlation between line voltage and power. It is useful in projects that need a simplified system with existing regulators.

Example: Vi ≥ 230V – 100%; Vi ≤ 185V – 60%

Functionalities

Constant Luminous Management (CLM)

Optional function parallel to the programming that maintains the project illumination levels constant throughout the installation’s life, increasing the luminaire’s power proportionally to the LED depreciation. Our standard programming is 0h 80%; 60,000h 100%.

Temperature control

Optional automatic protection to safeguard the integrity of the lighting components. It monitors the maximum temperature, activating a flow reduction to recover an acceptable value.

Surge protection

Protector against voltage spikes caused by thunderstorms. Sized for a maximum discharge current of 10kA.

Distributions

Type I

Type II

Type II+III

Type III

Type IV

Applications

Column lighting is the most well-organized, functional option for urban projects. It harmonizes layouts from a technical perspective, with good rates of uniformity and suitable lighting values. The accessories allow the luminaire to be attached to cylindrical columns of Ø127 mm, to flat columns or to sleeves of Ø50/62 mm, adjustable between -5° and 90°.

Materials

Accessory for cylindrical columns of Ø127 mm, for flat columns and for adjustable adaptation to sleeves of Ø50/62 mm, made from die cast EN-AC-47100 aluminum, thermal coating finish. A2 stainless steel screws. Column made from hot-dip galvanized S-275 JR Class 1 steel, painted finish: 4.70 m, 6.00 m heights with one circular section segment of Ø127 mm; 8.20 m, 9.20 m heights with two circular section segments, the upper one of Ø127 mm and the lower one of Ø152 mm.

Installation

Column fixed in a concrete block on-site, with a groove for electrical connection, and four anchor bolts per column, 20 cm below the pavement level. Installation and assembly instructions, screws, template, and anchor bolts included.

Weight

Luminaire: 7.8

Single cylindrical column accessory: 1.7
Double cylindrical column accessory: 1.9
Single flat column accessory: 0.6
Double flat column accessory: 0.8
Single retrofit column accessory: 1.0

*Approximate weight without packaging (kg)

Wall-mounted lighting provides illumination while maintaining coherence throughout the entire project layout. In this way, the luminaire is completely integrated into the vertical limit, in order to illuminate architectural facades, pathways, squares, parking areas, landscapes, or transit areas.

Materials

Accessory made from die cast EN-AC-47100 aluminum, thermal coating finish. A2 stainless steel screws.

Installation

Attach the accessory to the surface and then the luminaire. The system is compatible with a recessed or surface electrical installation. Installation and assembly instructions, and screws included.