Products /
The Albany Series brings Landmark’s modular aluminium system to short-span pedestrian crossings, offering an anti-corrosive, low-maintenance bridge solution for beach, wetland and other highly corrosive environments. Built from prefabricated modules that bolt together on site, it pairs a lightweight aluminium frame with FRP grate decking for fast, low-disruption installation.
Please note: Images may depict products with optional upgrades not included as standard. Some images are architectural renders and are intended for illustrative purposes only. Actual product appearance may vary
Prefabricated modular kit-form construction
Straight and angled landing modules plus stair modules
Corrosion-resistant, suited to beach and coastal crossings
Fast, low-noise on-site assembly
Relocatable and reusable
Modular aluminium frame.
Fibre Reinforced Plastic (FRP) grate decking (9mm aperture) as standard; hardwood or Wood Plastic Composite (WPC) decking available.
Powder coating or two-pack epoxy paint finishes; a selection of cap-rails in WPC or timber.
Stainless steel fixings; stainless steel anti-vandal fastening system where applicable.
Straight modules: 1.35m or 2m clear width x 1.0/2.0/3.0/4.0m standard lengths
Angled modules: 1.35m or 2m clear width x 30 deg/45 deg/60 deg/90 deg standard angles
Stair modules: 1.35m or 2m clear width x 0.6/1.2/1.8/2.4/3.0/3.6m standard sizes
Pre-engineered to 3kPa loading
Custom solutions available
Hardwood decking (choice of stain colour tone)
Wood Plastic Composite (WPC) decking
Choice of hand and kick rails in steel, aluminium or timber
Disabled access rails; bicycle rails
Specialised (Diamond) piers for sensitive or remote sites
All hot-dipped galvanised steel manufactured to AS/NZS 4680:2006; hardwood ACQ treated to Hazard Level 4 (F17 or better), pine LOSP treated to Hazard Level 3 (F7). Supplied with professional building application drawings, an independent engineering certificate and complete pier/abutment design (subject to geotechnical report). Manufactured under ISO 9001 and BS OHSAS 18001:2007 certification, meeting or exceeding the National Construction Code and relevant Australian Standards (AS1170 Structural Design Actions, AS1428.1 Design for Access and Mobility, AS1720 Timber Structures, AS4100 Steel Structures). Engineered to 5kPa live loads and up to 2.0m/sec flood loads where required. Backed by a 10-year structural warranty, extended to 20 years when supplied and installed by Landmark or a Landmark-approved installer.
For detailed product and service information and downloadable resources,including brochures, warranties, maintenance guides and other documentation, please visit our Resources page.
If you require modifications to a product’s standard specifications, contact our consultants today to discuss a tailored solution for your project.
Speak with a Landmark Project Consultant today and discover the right solution for your next project. Request your consultation now.
