close
  Professional log-in

           | 

Professional log-in
Photo Gallery

The Photo Gallery contains an extensive range of pictures from our entire product range. Click on the button above to check it out now....
Whats new?!
• Lightweight Aluminium Bridges
• Park & Eco BBQ's
• Santa & Cole Collection
Colour & Finish Options
Timber Stain Colours
Floorclear Timbertone Walnut Brown

Plascoat Thermoplastic Coating

Plascoat is a thermoplastic coating that has been specifically designed to provide a long lasting, tough coating on mild steel, galvanised steel and aluminium. It has proved itself across a wide range of outdoor applications all over the world in extreme temperatures and conditions.

Plascoat is resistant to stress cracking and impact, adverse weather conditions, detergents, UV, graffiti, suitable in submerged environments, salt spray and typical airborne pollutants. The coating maintains excellent adhesion to metal substrate without the need of a primer. The material also provides good abrasion and impact resistance.

Unique features:

  • Excellent corrosion protection due to superior edge coverage and unique adhesion mechanism.
  • Superior colour stability
  • No primer – one coat solution
  • Electrostatic spray or fluidised bed application
  • Low VOCs and approved for contact with potable water and food approved ingredients
  • Tough, yet highly flexible
  • Will not chip or crack in service
  • Graffiti can be wiped clean
  • Attractive gloss finish in a range of colours
  • Superior resistance to salt, sea, sand, sun and cold or hot temperature impact properties from the tropics to the arctic


Colorbond® Steel Colour Matrix
Standard Range Premium Range
Old New Ultra steel & Stainless steel
Tuscan Red Headland®  
Heritage Red Manor Red™  
Pale Terracotta*    
  Jasper™  
  Sandbank®  
Smooth Cream Classic Cream™  
Off White Surfmist® Surfmist®
  Zincalume®  
Wheat* Evening Haze®  
Merino Paperbark®  
Birch Dune® Dune®
Stone*    
Gull Grey Shale Grey™  
Armour Grey Windspray® Windspray®
Slate Grey Woodland Grey® Woodland Grey®
  Bushland®  
Mist Green Pale Eucalypt®  
Rivergum Wilderness®  
Caulfield Green Cottage Green™  
Torres Blue* Loft® Loft®
Mountain Blue Deep Ocean®  
  Ironstone®  
Ebony Monument®  

* Colours are no longer standard roofing colours.
Colorbond® Combination Wizard
Use this colour selection tool to help visualize your project. Note that this is a guide only and that actual colours may vary slightly from what your screen depicts. 

 
Colorbond® Information
  • The only colour regularly available in small quantities in stainless steel is Surf Mist.
  • Due to limitations in technology, the representations of the COLORBOND® Metallic steel colours are unable to demonstrate the dynamic changeable qualities caused by lighting variation.
  • COLORBOND®, BlueScope and ® colour names are registered trade marks of BlueScope Steel Limited. TM colour names are trade marks of BlueScope Steel Limited.
Maintaining Colorbond® & Zincalume® Steel
Simple maintenance of COLORBOND® steel and ZINCALUME® steel by regular washing with water will not only enhance its life but maintain its attractiveness for longer periods thus protecting your asset. Applications where the paint finish is automatically washed by rainwater do not usually require this maintenance, e.g. roof cladding. Examples of applications requiring maintenance cleaning include wall cladding under eaves, and the underside of eave gutters.

Areas not regularly washed by rainwater should be hosed down at least every six months and more frequently in coastal areas where marine salt spray is prevalent, and in areas where high levels of industrial fallout occur.

In cases where the regular maintenance referred to above does not remove all dirt which may have adhered to the surface of the paint, the following procedure should be carried out:
  • Wash the surface with a mild solution of pure soap or mild non-abrasive kitchen detergent in warm water.
  • Application should be with a sponge, soft cloth or soft bristle nylon brush, and should be gentle to prevent shiny spots.
  • The COLORBOND® steel and ZINCALUME® steel should be thoroughly rinsed with clean water immediately after cleaning to remove traces of detergent.

Never use abrasive or solvent type cleaners (turpentine, petrol, kerosene, paint thinners) on COLORBOND® steel and ZINCALUME® steel.

If cared for in accordance with these instructions, your building components made from COLORBOND® pre-painted steel and ZINCALUME® steel will give many years of low maintenance life.

This information is intended as a guide only. Additional technical information can be obtained from the Colorbond website at www.bluescopesteel.com.au
Anodised Aluminium Colours
Olive Mist Clear Blue Night Grey Smoke
Powder Coating Colours
Click here for a printable PDF of the Dulux® Powder Coating colours. The range also contains a selection of colours which match the Colorbond® range.